Original: $26.16
-70%$26.16
$7.85The Story
Pro-spec Easy Ride Windshield Extender Clip-on for Hero Xpluse 200 4 V - ER770
Designed for: Yezdi Adventure, Hero Xpulse 200 Series, and select ADV-style motorcycles
The Pro-Spec Easy Ride ER770 is a tall-profile, clip-on windshield extender engineered for motorcycles with short adventure-style windscreens. Designed using the lip extender principle, the ER770 improves aerodynamic efficiency by creating a protective air bubble that reduces windblast, turbulence, and rider fatigue, especially during long rides.
It’s particularly effective for bikes like the Yezdi Adventure and Hero Xpulse 200, where the stock windscreen height often results in wind buffeting. The ER770 solves this with a taller profile, redirecting the air flow for enhanced comfort and reduced helmet noise.
Key Features
- Tall Extender Profile: Provides improved wind deflection over short OE adventure windscreens.
- Reduces Buffeting: Eliminates turbulence caused by the OE screen, reducing windblast and enhancing stability.
- Height Adjustable: Fine-tune the extender height based on your riding style and road conditions.
- Tool-Free Clip-On Mounting: Quick to install and remove with no permanent modifications.
- Compatible with Windscreen Thickness : 3 – 5 mm
Package Contents
| Sl. | Description | Qty. |
|---|---|---|
| 1 | Windshield Extender Screen | 1 |
| 2 | Height Adjustment Slider (Set) | 1 |
| 3 | Clip-On Mount (Set) | 1 |
| 4 | Front Clamp (Set) | 1 |
| 5 | CSK Allen Head Screw – M4 x 16 mm | 4 |
| 6 | CSK Allen Head Screw – M4 x 12 mm | 2 |
| 7 | Height Adjusting Lock Screws (Set) | 1 |
| 8 | 2.5 mm Allen Key | 1 |
🛠️ Installation Instructions
⚠️ Note: While the ER770 is designed for easy DIY installation, professional assistance is recommended if needed. Some components may arrive pre-assembled.
-
Remove Lock Screws
Detach the two Lock Screws (7) from the clip-on mount. -
Fit the Screen to the Slider
Align the extender screen with the front clamp and slide it into the height adjustment slider (2).
Secure using the Lock Screws (7) (refer to figure “b”). -
Adjust and Tighten
Loosen the CSK Allen Head Screws (6) using the included 2.5 mm Allen key.
Center the extender over the stock screen, then tighten to lock it in place.
Care & Cleaning
- Clean using water, neutral soap, and a microfiber cloth or soft sponge.
- Do not use dry cloths, solvents, or abrasive cleaners—these may scratch or damage the extender’s surface.
- Ensure the OE screen is free from anti-scratch coatings, which may affect the lamp grip.
Motorcycle Compatibility
| S. No. | Brand | Model |
|---|---|---|
| 1 | Yezdi | Adventure |
| 2 | Hero | Xpulse 200 Rally / Pro |
| 3 | Hero | Xpulse 200 4V |
| 4 | Hero | Xpulse 200 2V |
| 5 | Kawasaki | Versys 650 (2022+) |
📏 Recommended Windscreen Thickness : 3 – 5 mm
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Pro-spec Easy Ride Windshield Extender Clip-on for Hero Xpluse 200 4 V - ER770
Designed for: Yezdi Adventure, Hero Xpulse 200 Series, and select ADV-style motorcycles
The Pro-Spec Easy Ride ER770 is a tall-profile, clip-on windshield extender engineered for motorcycles with short adventure-style windscreens. Designed using the lip extender principle, the ER770 improves aerodynamic efficiency by creating a protective air bubble that reduces windblast, turbulence, and rider fatigue, especially during long rides.
It’s particularly effective for bikes like the Yezdi Adventure and Hero Xpulse 200, where the stock windscreen height often results in wind buffeting. The ER770 solves this with a taller profile, redirecting the air flow for enhanced comfort and reduced helmet noise.
Key Features
- Tall Extender Profile: Provides improved wind deflection over short OE adventure windscreens.
- Reduces Buffeting: Eliminates turbulence caused by the OE screen, reducing windblast and enhancing stability.
- Height Adjustable: Fine-tune the extender height based on your riding style and road conditions.
- Tool-Free Clip-On Mounting: Quick to install and remove with no permanent modifications.
- Compatible with Windscreen Thickness : 3 – 5 mm
Package Contents
| Sl. | Description | Qty. |
|---|---|---|
| 1 | Windshield Extender Screen | 1 |
| 2 | Height Adjustment Slider (Set) | 1 |
| 3 | Clip-On Mount (Set) | 1 |
| 4 | Front Clamp (Set) | 1 |
| 5 | CSK Allen Head Screw – M4 x 16 mm | 4 |
| 6 | CSK Allen Head Screw – M4 x 12 mm | 2 |
| 7 | Height Adjusting Lock Screws (Set) | 1 |
| 8 | 2.5 mm Allen Key | 1 |
🛠️ Installation Instructions
⚠️ Note: While the ER770 is designed for easy DIY installation, professional assistance is recommended if needed. Some components may arrive pre-assembled.
-
Remove Lock Screws
Detach the two Lock Screws (7) from the clip-on mount. -
Fit the Screen to the Slider
Align the extender screen with the front clamp and slide it into the height adjustment slider (2).
Secure using the Lock Screws (7) (refer to figure “b”). -
Adjust and Tighten
Loosen the CSK Allen Head Screws (6) using the included 2.5 mm Allen key.
Center the extender over the stock screen, then tighten to lock it in place.
Care & Cleaning
- Clean using water, neutral soap, and a microfiber cloth or soft sponge.
- Do not use dry cloths, solvents, or abrasive cleaners—these may scratch or damage the extender’s surface.
- Ensure the OE screen is free from anti-scratch coatings, which may affect the lamp grip.
Motorcycle Compatibility
| S. No. | Brand | Model |
|---|---|---|
| 1 | Yezdi | Adventure |
| 2 | Hero | Xpulse 200 Rally / Pro |
| 3 | Hero | Xpulse 200 4V |
| 4 | Hero | Xpulse 200 2V |
| 5 | Kawasaki | Versys 650 (2022+) |
📏 Recommended Windscreen Thickness : 3 – 5 mm
